Installation guide

Chapter 10
138 Sniffer Technologies
3 Highlight one of the objects in the Summary pane by clicking it. The
Detail pane automatically updates to show detailed statistics for the
object selected in the Summary pane.
For example, Figure 10-15 shows a network object for a wireless station
selected at the Expert DLC layer. The Detail pane shows detailed statistics for
the selected object.
Figure 10-15. The Expert Window Panes
DLC Layer Expert Detail Display with 802.11 Information
The Expert creates objects at the DLC layer with 802.11 information based on
the DLC addresses in the 802.11 traffic it observes. If the original source or
final destination address in an 802.11 frame is a traditional wired station, the
Expert creates a DLC layer object with 802.11 information in its Detail Display.
A separate object is created for each DLC address observed (including
multicast and broadcast addresses).
Expert Summary PaneExpert Overview Pane
Protocol Statistics Pane
Hierarchical Pane
Notice that this DLC
layer object has an
associated object at
the Wireless layer
Expert Detail Pane
This section describes the information in
this pane for objects selected in the
Summary pane at both the DLC layer
(shown) and the Wireless layer.