Installation guide

Wireless Guide 93
Configuring Wireless LANs to Capture
Figure 9-7. The Host Table’s 802.11 Tab
4 Right-click any entry in the Host Table and select the Add to Known
Wireless Units List command from the context menu that appears.
The selected addresses are added to the Expert’s list. You can verify
that they have been added by displaying the Tools > Expert Options
> 802.11 Options tab. The Known...in the Network lists will include
the newly added addresses.
Adding Known Addresses from the Postcapture Display
Use the following procedure to add the MAC addresses of known wireless
units (either access points or mobile units) automatically from the Expert tab of
the postcapture display.
To add known addresses automatically from the postcapture display:
1 Display either a capture buffer or a saved trace file.
2 Click the Expert tab of the postcapture display.