Installation guide

Chapter 9
90 Sniffer Technologies
3 Use the drop-down list under the Keys Per Channel option to select
the channel for which you would like to specify WEP keys (Figure 9-6).
The fields in the Encryption section automatically populate with the
current WEP key settings for the selected channel.
Figure 9-5. Select the Channel for Key Specification
4 Specify the WEP keys for the selected channel in the Encryption
section of the 802.11 tab. See Setting Encryption Options on page 85
for details.
5 Click Set to enable the WEP keys for the selected channel.
6 Repeat Step 3 through Step 4 for each channel for which you would like
to specify different WEP keys.
7 When you have finished setting keys, click OK on the 802.11 tab.
Setting Expert Wireless Options
Expert wireless options are found in the 802.11 Options tab of the Sniffer
software’s Expert Properties dialog box. Display the 802.11 Options tab by
selecting Expert Options from the Tools menu and clicking the 802.11
Options tab in the dialog box that appears. Figure 9-6 shows the 802.11
Options tab of the Expert Options dialog box.