Installation guide

Chapter 1
8 Sniffer Portable
Figure 1-1. Uninstalling the QoS Packet Scheduler Service
If you do not remove the QoS Packet Scheduler Service during the Sniffer
Portable setup, you can also perform the following:
 Uninstalling the QoS Packet Scheduler Service after Installation on page
8
 Unbinding the QoS Packet Scheduler Service from Selected Adapters
on page 9
Uninstalling the QoS Packet Scheduler Service after Installation
Use the following procedure to uninstall the QoS Packet Scheduler Service
after Sniffer Portable is installed.
To completely remove the QoS Packet Scheduler Service after
completing the Sniffer Portable installation:
1 Open the Network Connections folder by selecting the Start > Settings
> Network Connections option.
2 Right-click any of the Connection entries in the folder and select the
Properties command from the menu that appears.
The Connection Properties dialog box appears, as in Figure 1-2. The
following example is for wireless connections.
100413Portable_Install.book Page 8 Friday, March 25, 2005 2:22 PM