User's Manual
Table Of Contents
- Contents
- 1. Introduction
- The Harmony Family
- System Requirements
- 2. Installation
- Installation Procedure
- Mounting Option
- LED Indicators
- 3. Wirefree Operation
- Harmony Architecture
- The IEEE 802.11b Specification
- Roaming Between Harmony 802.11b Access Points
- Roaming Guidelines
- 4. Configuration Parameters
- Basic Settings
- WEP Settings
- Advanced Settings
- 5. Performance Hints
- Microwave Ovens
- Range
- 6. Troubleshooting
- How to Obtain Help with Your LAN Installation
- Common Problems and Solutions
- A. How to Reach Technical Support
- B. Harmony 802.11b Access Point Specifications
23
Problem 3:
The Status LED is amber.
Solution 3:
The Status LED will turn amber under two conditions:
1. The unit is initializing;
2. The unit has successfully initialized but could not find an AP Controller to part-
ner with.
Confirm that the Access Point has successfully partnered with the AP Controller via
the Wireless Network Management interface.