User's Manual
Table Of Contents
- Contents
- 1. Introduction
- The Harmony Family
- System Requirements
- The Product Package
- 2. Installation
- Installation Procedure
- Mounting Option
- LED Indicators
- Power Requirements
- 3. Wirefree Operation
- Harmony Architecture
- The IEEE 802.11b Specification
- Roaming Between Harmony 802.11b Access Points
- Roaming Guidelines
- 4. Configuration Parameters
- Basic Settings
- AP Name
- Physical Address
- Enable AP
- Partnered APC
- Channel
- Supported Clients
- SSID
- IP Addressing
- Security Settings
- WEP Encryption
- WEP Key Size
- WEP Keys
- Advanced Settings
- Supported Rates
- RTS/CTS
- 5. Performance Hints
- Microwave Ovens
- Range
- 6. Troubleshooting
- How to Obtain Help with Your LAN Installation
- LED Error Codes
- Common Problems and Solutions
- A. Parameters
- B. IEEE 802.11b Direct Sequence Channels
- C. Harmony 802.11b Access Point Specifications
- D. How to Reach Technical Support
- Index
7
System Requirements
To begin using the Harmony 802.11b Access Point, you must have the following
minimum requirements:
❑ At least one Harmony Access Point Controller
❑ An Ethernet (10Base-T) LAN switch or hub
❑ At least one 802.11b PC Card
The Product Package
Each Harmony 802.11b Access Point comes with:
❑ One Harmony 802.11b Access Point Model 8550
❑ One power adapter (12V, 1 Amp)
❑ One Harmony 802.11b Access Point Model 8550 User’s Guide
❑ One warranty registration card