User's Manual
Table Of Contents
- Contents
- 1. Introduction
- The Harmony Family
- System Requirements
- The Product Package
- 2. Installation
- Installation Procedure
- Mounting Option
- LED Indicators
- Power Requirements
- 3. Wirefree Operation
- Harmony Architecture
- The IEEE 802.11b Specification
- Roaming Between Harmony 802.11b Access Points
- Roaming Guidelines
- 4. Configuration Parameters
- Basic Settings
- AP Name
- Physical Address
- Enable AP
- Partnered APC
- Channel
- Supported Clients
- SSID
- IP Addressing
- Security Settings
- WEP Encryption
- WEP Key Size
- WEP Keys
- Advanced Settings
- Supported Rates
- RTS/CTS
- 5. Performance Hints
- Microwave Ovens
- Range
- 6. Troubleshooting
- How to Obtain Help with Your LAN Installation
- LED Error Codes
- Common Problems and Solutions
- A. Parameters
- B. IEEE 802.11b Direct Sequence Channels
- C. Harmony 802.11b Access Point Specifications
- D. How to Reach Technical Support
- Index
36
RTS/CTS 23, 30
RTS/CTS Threshold 23
S
Shared Key Authentication 20, 21
SmartArchitecture 5
SmartAttach 5
Spread Spectrum
Direct Sequence 14, 32
SSID 15, 19, 27, 30
Static IP Addressing 19
Status LED 9, 10, 28
Blinking Amber 28
Blinking Red 26
Solid Amber 28
Supported Clients 19, 30
Supported Rates 22–23, 30, 32
T
Technical Support 33
Temperature
Operating 32
Throughput 29
Troubleshooting 26–29
U
Upgrade 29
Use WEP for Authentication and Encryption 21, 30
Use WEP for Authentication Only 20, 30
Use WEP for Encryption Only 21, 30
W
Warranty 1–2
WEP Encryption Parameter 20–21, 30
WEP Key 15, 21–22, 30
WEP Key Size 21, 30
Wired Equivalent Privacy (WEP) 15, 20–22, 28
128 bit 21, 22
40 bit 21, 22