User's Manual
Table Of Contents
- Contents
- 1. Introduction
- The Harmony Family
- System Requirements
- The Product Package
- 2. Installation
- Installation Procedure
- Mounting Option
- LED Indicators
- Power Requirements
- 3. Wirefree Operation
- Harmony Architecture
- The IEEE 802.11b Specification
- Roaming Between Harmony 802.11b Access Points
- Roaming Guidelines
- 4. Configuration Parameters
- Basic Settings
- AP Name
- Physical Address
- Enable AP
- Partnered APC
- Channel
- Supported Clients
- SSID
- IP Addressing
- Security Settings
- WEP Encryption
- WEP Key Size
- WEP Keys
- Advanced Settings
- Supported Rates
- RTS/CTS
- 5. Performance Hints
- Microwave Ovens
- Range
- 6. Troubleshooting
- How to Obtain Help with Your LAN Installation
- LED Error Codes
- Common Problems and Solutions
- A. Parameters
- B. IEEE 802.11b Direct Sequence Channels
- C. Harmony 802.11b Access Point Specifications
- D. How to Reach Technical Support
- Index
35
Harmony Access Point Controller 6, 7, 8, 9, 13, 17, 19
Harmony PC Card
802.11b 6
OpenAir 6
Harmony Power System 6, 8, 9, 12, 32
I
IEEE 802.11b
Specification 14
Installation Assistance 26
Installation Considerations 8
Installation Instructions 8–9
IP Addressing 19–20, 30
L
LED Error Codes 26
LED Indicators 9, 10–12
Link LED 9, 11, 27
M
Microwave Oven 24
Mounting 10
O
Open System Authentication 21
Output Power 32
P
Partnered APC 18, 30
Physical Address 18
Power Adapter 7, 8, 9, 12, 27, 32
Power Requirements 12
Power System. See Harmony Power System
Product Package 7
Product Specifications 32
R
Radio LED 10
Range 24–25, 27
Request to Send (RTS) 23
Requirements 7
Roaming 14–16