User's Manual
Table Of Contents
- Contents
- 1. Introduction
- The Harmony Family
- System Requirements
- The Product Package
- 2. Installation
- Installation Procedure
- Mounting Option
- LED Indicators
- Power Requirements
- 3. Wirefree Operation
- Harmony Architecture
- The IEEE 802.11b Specification
- Roaming Between Harmony 802.11b Access Points
- Roaming Guidelines
- 4. Configuration Parameters
- Basic Settings
- AP Name
- Physical Address
- Enable AP
- Partnered APC
- Channel
- Supported Clients
- SSID
- IP Addressing
- Security Settings
- WEP Encryption
- WEP Key Size
- WEP Keys
- Advanced Settings
- Supported Rates
- RTS/CTS
- 5. Performance Hints
- Microwave Ovens
- Range
- 6. Troubleshooting
- How to Obtain Help with Your LAN Installation
- LED Error Codes
- Common Problems and Solutions
- A. Parameters
- B. IEEE 802.11b Direct Sequence Channels
- C. Harmony 802.11b Access Point Specifications
- D. How to Reach Technical Support
- Index
34
Index
100Base-TX 9
10Base-T 7, 9
A
Antenna Placement Considerations 8, 25
AP AutoConfigure Defaults 13, 17
AP Name 17, 30
B
Basic Service Set (BSS) 14
C
Channel 14, 15, 18–19, 30, 31, 32
Clear to Send (CTS) 23
Configuration Parameters 17–23
D
DHCP 19, 30
Dynamic IP Addressing 20
E
Enable AP 18, 28, 30
Encryption Key. See WEP Key
ESSID. See SSID
Ethernet Cabling Restrictions 8
Ethernet LED 11
Ethernet Switch or Hub 7
Extended Service Set (ESS) 15, 21
F
FCC 2, 8
Firmware Upgrade 29
H
Harmony Access Point
802.11b 6
Configuration Parameters 17–23
Firmware Upgrade 29
Installation Instructions 8–9
OpenAir 6, 15, 16