User's Manual
Table Of Contents
- Contents
- 1. Introduction
- The Harmony Family
- System Requirements
- The Product Package
- 2. Installation
- Installation Procedure
- Mounting Option
- LED Indicators
- Power Requirements
- 3. Wirefree Operation
- Harmony Architecture
- The IEEE 802.11b Specification
- Roaming Between Harmony 802.11b Access Points
- Roaming Guidelines
- 4. Configuration Parameters
- Basic Settings
- AP Name
- Physical Address
- Enable AP
- Partnered APC
- Channel
- Supported Clients
- SSID
- IP Addressing
- Security Settings
- WEP Encryption
- WEP Key Size
- WEP Keys
- Advanced Settings
- Supported Rates
- RTS/CTS
- 5. Performance Hints
- Microwave Ovens
- Range
- 6. Troubleshooting
- How to Obtain Help with Your LAN Installation
- LED Error Codes
- Common Problems and Solutions
- A. Parameters
- B. IEEE 802.11b Direct Sequence Channels
- C. Harmony 802.11b Access Point Specifications
- D. How to Reach Technical Support
- Index
31
B. IEEE 802.11b Direct Sequence Channels
The IEEE 802.11b standard specifies 14 Channels within the 2.4 GHz frequency band.
The following table lists the center frequency for each Channel.
If operating multiple Access Points in the same vicinity, the distance between the
center frequencies must be at least 25 MHz to avoid interference. There are three
independent Channels that do not overlap: 1, 6, and 11.
Note that the available Channels differ from country to country. In the United States,
only Channels 1 through 11 are available.
Channel Number Center Frequency
1 2.412 GHz
2 2.417 GHz
3 2.422 GHz
4 2.427 GHz
5 2.432 GHz
6 2.437 GHz
7 2.442 GHz
8 2.447 GHz
9 2.452 GHz
10 2.457 GHz
11 2.462 GHz
12 2.467 GHz
13 2.472 GHz
14 2.484 GHz