User's Manual

33
Parameters
Parameter Range Default
AP Name 1-21 characters unit’s physical address
Enable AP Enabled, Disabled Enabled
Auto Image Synchronization Enabled, Disabled Enabled
Operating Mode Automatic, Managed,
Tunneled
Automatic
Partnered AP Controller N/A Any
Enable 2X Mode Enabled, Disabled Disabled
Channel
(Models 8569 & 8570)
In 802.11a mode:
Channels 36, 40, 44, 48, 52,
56, 60, and 64; in 2X mode:
Channels 42, 50, and 58
Assigned by AP Controller
Channel
(Model 8571)
In 802.11a mode:
Channels 56, 60, and 64;
in 2X mode: Channel 58
Assigned by AP Controller
SSID Up to 32 characters proxim
Group Membership N/A Default 802.11a Group
IP Address Use DHCP, Specify IP Use DHCP
Security Level No Security, Use WEP for
Encryption and
Authentication, Use Harmony
Security Protocol
No Security
WEP Key Size
(only valid when Use WEP for
Encryption & Authentication
is enabled)
64-bit, 128-bit, 152-bit 64-bit
WEP Key(s)
(select one as default; only
valid when Use WEP for
Encryption & Authentication
is enabled)
10 hexadecimal digits for
64-bit; 26 hexadecimal
digits for 128-bit; 32
hexadecimal digits for
152-bit
Blank