User's Manual

39
Parameters
Parameter Range Default
AP Name 1-21 characters unit’s physical address
Enable AP Enabled, Disabled Enabled
Auto Image Synchronization Enabled, Disabled Enabled
Operating Mode Automatic, Managed, Tunneled Automatic
Partnered AP Controller N/A Any
Enable 2X Mode
(Not available in Europe or
Japan)
Enabled, Disabled Disabled
Channel
(Models 8569 & 8570)
U.S. & Canada: In 802.11a mode:
Channels 36, 40, 44, 48, 52, 56,
60, & 64; in 2X mode: Channels
42, 50, & 58
Europe: Channels 36, 40, 44, 48,
52, 56, 60, & 64
Japan: Channels 34, 38, 42, & 46
Assigned by AP Controller
Channel
(Model 8571)
U.S. & Canada: In 802.11a mode:
Channels 56, 60, & 64;
in 2X mode: Channel 58
Assigned by AP Controller
SSID Up to 32 characters proxim
Group Membership N/A Default 802.11a Group
IP Address Use DHCP, Specify IP Use DHCP
Security Level No Security, Use WEP for
Encryption and Authentication,
Use Harmony Security Protocol
No Security
WEP Key Size
(only valid when Use WEP
for Encryption &
Authentication is enabled)
64-bit, 128-bit, 152-bit 64-bit
WEP Key(s)
(select one as default; only
valid when Use WEP for
Encryption &
Authentication is enabled)
10 hexadecimal digits for 64-bit;
26 hexadecimal digits for
128-bit; 32 hexadecimal digits
for 152-bit
Blank