User guide
Table Of Contents
- Introduction
- Installation and Initialization
- System Status
- Advanced Configuration
- System
- Network
- Interfaces
- Management
- Filtering
- Alarms
- Bridge
- QoS
- Radius Profiles
- SSID/VLAN/Security
- Monitoring
- Commands
- Troubleshooting
- Command Line Interface (CLI)
- General Notes
- Command Line Interface (CLI) Variations
- CLI Command Types
- Using Tables and Strings
- Configuring the AP using CLI commands
- Set Basic Configuration Parameters using CLI Commands
- Set System Name, Location and Contact Information
- Set Static IP Address for the AP
- Change Passwords
- Set Network Names for the Wireless Interface
- Enable 802.11d Support and Set the Country Code
- Enable and Configure TX Power Control for the Wireless Interface
- Configure SSIDs (Network Names), VLANs, and Profiles
- Download an AP Configuration File from your TFTP Server
- Backup your AP Configuration File
- Set up Auto Configuration
- Other Network Settings
- Configure the AP as a DHCP Server
- Configure the DNS Client
- Configure DHCP Relay
- Configure DHCP Relay Servers
- Maintain Client Connections using Link Integrity
- Change Wireless Interface Settings
- Set Ethernet Speed and Transmission Mode
- Set Interface Management Services
- Configure Syslog
- Configure Intra BSS
- Configure Wireless Distribution System
- Configure MAC Access Control
- Set RADIUS Parameters
- Set Rogue Scan Parameters
- Set Hardware Configuration Reset Parameters
- Set VLAN/SSID Parameters
- Set Security Profile Parameters
- CLI Monitoring Parameters
- Parameter Tables
- CLI Batch File
- ASCII Character Chart
- Specifications
- Technical Services and Support
- Statement of Warranty
Advanced Configuration AP-700 User Guide
Alarms
80
Wireless Interface/Card Trap Group
Operational Trap Group
oriTrapAuthenticationFailure Client authentication failure has occurred.
Authentication failures can range from:
• MAC Access Control table
• RADIUS MAC authentication
• 802.1x authentication specifying the
EAP-Type
• WORP mutual authentication
• SSID authorization failure specifying the
SSID
• VLAN ID authorization failure specifying the
VLAN ID
Major
oriTrapUnauthorizedManagerDetected Unauthorized manager has attempted to view
and/or modify parameters
Major
oriTrapRADScanComplete RAD scan is successfully completed Informational
oriTrapRADScanResults Provides information on the RAD Scan results Informational
oriTrapRogueScanStationDetected Rogue station detected Informational
oriTrapRogueScanCycleComplete Rogue scan successfully completed Informational
Trap Name Description Severity Level
oriTrapWLCFailure General failure wireless interface/card failure. Critical
oriTrapWLCRadarInterferenceDetected Radar interference detected on the channel being
used by the wireless interface
Major
MIC Attack Detected Supported in Web interface only Major
MIC Attack Report Detected Supported in Web interface only Major
Trap Name Description Severity Level
oriTrapUnrecoverableSoftwareErrorDetected Unrecoverable software error detected. Causes
software watch dog timer to expire, which in turn
causes the device to reboot.
Critical
oriTrapRADIUSServerNotResponding RADIUS server not responding to authentication
requests sent from the RADIUS client in the
device
Major
oriTrapModuleNotInitialized Module (hardware or software) not initialized Major
oriTrapDeviceRebooting Device rebooting Informational
oriTrapTaskSuspended Task suspended Critical
oriTrapBootPFailed Response to the BootP request not received;
device not dynamically assigned an IP address
Major
Trap Name Description Severity Level