User guide

Installation and Initialization AP-700 User Guide
Initialization
31
Install Software with HTTP Interface
Use the Update AP via HTTP tab to update the AP with the latest software image.
1. Click Commands > Update AP > via HTTP.
Figure 2-11 Update AP via HTTP Command Screen
2. From the File Type drop-down menu, select Image.
3. Use the Browse button to locate or manually type in the name of the file (including the file extension) you downloaded
from the Proxim Knowledgebase. If typing the file name, you must include the full path and the file extension in the file
name text box.
4. To initiate the HTTP Update operation, click the Update AP button.
A warning message advises you that a reboot of the device will be required for changes to take effect.
Figure 2-12 Warning Message
5. Click OK to continue with the operation or Cancel to abort the operation.
6. If the operation is unsuccessful, you will receive an error message. If this occurs, see the Troubleshooting chapter or
attempt installing the software with a TFTP server, as described in the next section.
If the operation is successful, you will receive a confirmation message.
7. Reboot the AP as follows:
• Click Commands > Reboot.
• Enter 0 in the Time to Reboot field.
• Click OK.