User guide
Table Of Contents
- Introduction
- Installation and Initialization
- System Status
- Advanced Configuration
- System
- Network
- Interfaces
- Management
- Filtering
- Alarms
- Bridge
- QoS
- Radius Profiles
- SSID/VLAN/Security
- Monitoring
- Commands
- Troubleshooting
- Command Line Interface (CLI)
- General Notes
- Command Line Interface (CLI) Variations
- CLI Command Types
- Using Tables and Strings
- Configuring the AP using CLI commands
- Set Basic Configuration Parameters using CLI Commands
- Set System Name, Location and Contact Information
- Set Static IP Address for the AP
- Change Passwords
- Set Network Names for the Wireless Interface
- Enable 802.11d Support and Set the Country Code
- Enable and Configure TX Power Control for the Wireless Interface
- Configure SSIDs (Network Names), VLANs, and Profiles
- Download an AP Configuration File from your TFTP Server
- Backup your AP Configuration File
- Set up Auto Configuration
- Other Network Settings
- Configure the AP as a DHCP Server
- Configure the DNS Client
- Configure DHCP Relay
- Configure DHCP Relay Servers
- Maintain Client Connections using Link Integrity
- Change Wireless Interface Settings
- Set Ethernet Speed and Transmission Mode
- Set Interface Management Services
- Configure Syslog
- Configure Intra BSS
- Configure Wireless Distribution System
- Configure MAC Access Control
- Set RADIUS Parameters
- Set Rogue Scan Parameters
- Set Hardware Configuration Reset Parameters
- Set VLAN/SSID Parameters
- Set Security Profile Parameters
- CLI Monitoring Parameters
- Parameter Tables
- CLI Batch File
- ASCII Character Chart
- Specifications
- Technical Services and Support
- Statement of Warranty

Specifications AP-700 User Guide
Hardware Specifications
224
Hardware Specifications
Category Specification
Physical
Dimensions (H x W x L) 1 x 4.75 x 7.1 in (25 x 121 x 180 mm)
Weight Unit: .65 lb (.295 kg)
Power Supply: .45 lbs (.20 kg)
Electrical
Voltage 100 to 240 VAC +/- 10% (50-60 Hz) (power supply)
Power Draw <9 Watts (power supply)
Environmental
Storage Temperature -20°C to 85°C (-4°F to 185°F)
Operating Temperature 0°C to 55°C (32°F to 131°F)
Humidity 5 to 95% relative humidity, non-condensing
Interfaces
Wired Ethernet 10/100 Base-T auto-sensing RJ45 Female Socket, Auto-sensing
Wireless Ethernet 1 integrated 802.11a/b/g radio
Serial Port Standard RS-232 interface with DB-9 female connector
LEDs
Types Power
Ethernet Link
Wireless 802.11a/b/g Radio Link