User guide
Table Of Contents
- Introduction
- Installation and Initialization
- System Status
- Advanced Configuration
- System
- Network
- Interfaces
- Management
- Filtering
- Alarms
- Bridge
- QoS
- Radius Profiles
- SSID/VLAN/Security
- Monitoring
- Commands
- Troubleshooting
- Command Line Interface (CLI)
- General Notes
- Command Line Interface (CLI) Variations
- CLI Command Types
- Using Tables and Strings
- Configuring the AP using CLI commands
- Set Basic Configuration Parameters using CLI Commands
- Set System Name, Location and Contact Information
- Set Static IP Address for the AP
- Change Passwords
- Set Network Names for the Wireless Interface
- Enable 802.11d Support and Set the Country Code
- Enable and Configure TX Power Control for the Wireless Interface
- Configure SSIDs (Network Names), VLANs, and Profiles
- Download an AP Configuration File from your TFTP Server
- Backup your AP Configuration File
- Set up Auto Configuration
- Other Network Settings
- Configure the AP as a DHCP Server
- Configure the DNS Client
- Configure DHCP Relay
- Configure DHCP Relay Servers
- Maintain Client Connections using Link Integrity
- Change Wireless Interface Settings
- Set Ethernet Speed and Transmission Mode
- Set Interface Management Services
- Configure Syslog
- Configure Intra BSS
- Configure Wireless Distribution System
- Configure MAC Access Control
- Set RADIUS Parameters
- Set Rogue Scan Parameters
- Set Hardware Configuration Reset Parameters
- Set VLAN/SSID Parameters
- Set Security Profile Parameters
- CLI Monitoring Parameters
- Parameter Tables
- CLI Batch File
- ASCII Character Chart
- Specifications
- Technical Services and Support
- Statement of Warranty
Specifications AP-700 User Guide
Software Features
222
Advanced Bridging Functions
Medium Access Control (MAC) Functions
* DFS is required for 802.11a APs certified in the ETSI and TELEC regulatory domains and operating in the middle frequency band. When ACS
is disabled, available channels are limited to those in the lower frequency band. See Dynamic Frequency Selection/Radar Detection
(DFS/RD).
Feature Supported by AP-700
IEEE 802.1d Bridging 3
WDS Relay 3
Roaming 3
Protocol Filtering 3
Multicast/Broadcast Storm Filtering 3
Proxy ARP 3
TCP/UDP Port Filtering 3
Blocking Intra BSS Clients 3
Packet Forwarding 3
Feature Supported by AP-700
Automatic Channel Selection (ACS) 3
Dynamic Frequency Selection (DFS)/Radar Detection
(RD)*
3
Wireless Service Shutdown 3
802.11d Support 3
TX Power Control 3
Wireless Multimedia Enhancements/Quality of Service
(QoS)
3
Channel Blacklist 3
Closed System 3
Broadcast Unique Beacon 3
Super and Turbo Mode Support 3