User guide

Command Line Interface (CLI) AP-700 User Guide
Parameter Tables
209
Bridge Parameters
Spanning Tree Parameters
Spanning Tree Priority and Path Cost Table
Storm Threshold Parameters
Name Type Value Access CLI Parameter
Spanning Tree Group N/A R stp
Spanning Tree Status Integer enable
disable (default)
RW stpstatus
Bridge Priority Integer 0 - 65535
32768 (default)
RW stppriority
Maximum Age Integer 600 - 4000
(in 0.01 sec intervals;
i.e., 6 to 40 seconds)
2000 (default)
RW stpmaxage
Hello Time Integer 100 - 1000 (1/100
second; i.e., 1 to 10
seconds); enter values in
increments of 100
200 (default)
RW stphellotime
Forward Delay Integer 400 - 3000
(in 0.01 sec intervals;
i.e., 4 to 30 seconds)
1500 (default)
RW stpfwddelay
Name Type Value Access CLI Parameter
Spanning Tree Table Table N/A R stpbl
Table Index (Port) N/A 1 - 15 R index
Priority Integer 0 - 255
128 (default)
RW priority
Path Cost Integer 1 - 65535
100 (default)
RW pathcost
State Integer disable
blocking
listening
learning
forwarding
broken
R state
Status Integer enable
disable
RW status
Name Type Value Access CLI Parameter
Storm Threshold Group N/A (see below) N/A stmthres
Broadcast Threshold Integer 0 - 255 packets/sec
(default is 0)
RW stmbrdthres
Multicast Threshold Integer 0 - 255 packets/sec
(default is 0)
RW stmmultithres