User guide
Table Of Contents
- Introduction
- Installation and Initialization
- System Status
- Advanced Configuration
- System
- Network
- Interfaces
- Management
- Filtering
- Alarms
- Bridge
- QoS
- Radius Profiles
- SSID/VLAN/Security
- Monitoring
- Commands
- Troubleshooting
- Command Line Interface (CLI)
- General Notes
- Command Line Interface (CLI) Variations
- CLI Command Types
- Using Tables and Strings
- Configuring the AP using CLI commands
- Set Basic Configuration Parameters using CLI Commands
- Set System Name, Location and Contact Information
- Set Static IP Address for the AP
- Change Passwords
- Set Network Names for the Wireless Interface
- Enable 802.11d Support and Set the Country Code
- Enable and Configure TX Power Control for the Wireless Interface
- Configure SSIDs (Network Names), VLANs, and Profiles
- Download an AP Configuration File from your TFTP Server
- Backup your AP Configuration File
- Set up Auto Configuration
- Other Network Settings
- Configure the AP as a DHCP Server
- Configure the DNS Client
- Configure DHCP Relay
- Configure DHCP Relay Servers
- Maintain Client Connections using Link Integrity
- Change Wireless Interface Settings
- Set Ethernet Speed and Transmission Mode
- Set Interface Management Services
- Configure Syslog
- Configure Intra BSS
- Configure Wireless Distribution System
- Configure MAC Access Control
- Set RADIUS Parameters
- Set Rogue Scan Parameters
- Set Hardware Configuration Reset Parameters
- Set VLAN/SSID Parameters
- Set Security Profile Parameters
- CLI Monitoring Parameters
- Parameter Tables
- CLI Batch File
- ASCII Character Chart
- Specifications
- Technical Services and Support
- Statement of Warranty
Command Line Interface (CLI) AP-700 User Guide
Parameter Tables
197
802.11aSpecific Parameters
* Available for the 5 GHz frequency band in the FCC regulatory domain only.
† Super mode must be enabled before Turbo mode can be enabled.
Medium -86 -62
Small -78 -52
Mini -70 -42
Micro -62 -36
Name Type Value Access CLI Parameter
Operating Frequency
Channel
Integer Varies by regulatory domain and
country. See Available Channels
RW channel
Supported Data Rates Octet String See Transmit Rate, below R suppdatarates
Transmit Rate Integer32 0 (Auto Fallback)
6 Mbits/sec
9 Mbits/sec
12 Mbits/sec
18 Mbits/sec
24 Mbits/sec
36 Mbits/sec
48 Mbits/sec
54 Mbits/sec
RW txrate
Physical Layer Type Integer ofdm (orthogonal frequency division
multiplexing)
Rphytype
Regulatory Domain List DisplayString Varies by regulatory domain:
USA -- FCC
Hong Kong -- HK
Australia -- AU
Europe -- ETSI
Russia -- RU
Japan -- TELEC
Singapore -- IDA
Taiwan -- TW
China -- CN
Asia
Brazil
Argentina
Saudi Arabia
World Mode -- WO
Undefined
R regdomain
Super Mode Integer enable
disable (default)
RW supermode
Turbo Mode*
†
Integer enable
disable (default)
RW turbo
Distance Between
APs
Receive Sensitivity
Threshold (dBm)
Transmit Defer Threshold
(dBm)