Access Point User Guide

41
AP-4000 Series User Guide
3
System Status
The first screen displayed after Logging In is the System Status screen. You can always return to this screen by clicking
the Status button.
Figure 3-1 System Status Screen
The System Status screen provides the following information:
• System Status: This area provides system-level information, including the unit’s IP address and contact information.
See System for information on these settings.
• System Alarms: System traps (if any) appear in this area. Each trap identifies a specific severity level: critical, major,
minor, and informational. See Alarms for a list of possible alarms.
From this screen, you can also access the AP’s monitoring and configuration options by clicking on the buttons on the
left of the screen.