Access Point User Guide
Table Of Contents
- Introduction
- Installation and Initialization
- System Status
- Advanced Configuration
- System
- Network
- Interfaces
- Management
- Filtering
- Alarms
- Bridge
- QoS
- Radius Profiles
- SSID/VLAN/Security
- Monitoring
- Commands
- Troubleshooting
- Command Line Interface (CLI)
- General Notes
- Command Line Interface (CLI) Variations
- CLI Command Types
- Using Tables and Strings
- Configuring the AP using CLI commands
- Set Basic Configuration Parameters using CLI Commands
- Set System Name, Location and Contact Information
- Set Static IP Address for the AP
- Change Passwords
- Set Network Names for the Wireless Interface
- Enable 802.11d Support and Set the Country Code
- Enable and Configure TX Power Control for the Wireless Interface(s)
- Configure SSIDs (Network Names), VLANs, and Profiles
- Download an AP Configuration File from your TFTP Server
- Backup your AP Configuration File
- Set up Auto Configuration
- Other Network Settings
- Configure the AP as a DHCP Server
- Configure the DNS Client
- Configure DHCP Relay
- Configure DHCP Relay Servers
- Maintain Client Connections using Link Integrity
- Change your Wireless Interface Settings
- Set Ethernet Speed and Transmission Mode
- Set Interface Management Services
- Configure Syslog
- Configure Intra BSS
- Configure Wireless Distribution System
- Configure MAC Access Control
- Set RADIUS Parameters
- Set Rogue Scan Parameters
- Set Hardware Configuration Reset Parameters
- Set VLAN/SSID Parameters
- Set Security Profile Parameters
- CLI Monitoring Parameters
- Parameter Tables
- CLI Batch File
- ASCII Character Chart
- Specifications
- Technical Support
- Statement of Warranty
- Regulatory Compliance
Command Line Interface (CLI) AP-4000 Series User Guide
Parameter Tables
196
Wireless Distribution System (WDS) Security Table Parameters
The WDS Security Table manages WDS related security objects.
Ethernet Interface Parameters
RADIUS Accounting
Status per VLAN
Integer enable
disable
RW acctstatus
MAC ACL Status per
VLAN
Integer enable
disable
RW aclstatus
Security Profile Integer32 User defined RW secprofile
RADIUS MAC Profile DisplayString User defined RW radmacprofile
RADIUS EAP Profile DisplayString User defined RW radeapprofile
RADIUS Accounting
Profile
DisplayString User defined RW radacctprofile
QoS Policy Integer32 User defined RW qospolicy
Name Type Value Access CLI Parameter
WDS Security Table Table N/A R wdssectbl
Table Index Integer Primary wireless
interface = 3
Secondary wireless
interface = 4
R index
Security Mode Integer 1 (none)
2 (wep)
RW secmode
Encryption Key 0 WEPKeyType N/A WO encryptkey0
Name Type Value Access CLI Parameter
Ethernet Interface Group N/A R ethernet
Speed Integer 1 (10halfduplex)
2 (10fullduplex)
3 (10autoduplex)
4 (100halfduplex)
5 (100fullduplex)
6 (autohalfduplex)
7 (autoautoduplex)
(default)
RW etherspeed
MAC Address PhyAddress N/A R ethermacaddr