Specifications

Configuration Tsunami MP.11 5012-SUR Installation and Management

Security Parameters

Configure MAC Authentication

Click Configure > Security > MAC Auth to build a list of authorized wireless stations that can register at the 5012-SUR

and access the network.

MAC authentication is available only for BSUs.

Configure Encryption Parameters

NOTE: Be sure to set the encryption parameters and change the default passwords.

You can protect the wireless data link by using encryption. Encryption keys can be 5 (64-bit), 13 (WEP 128-bit), or 16

(AES 128-bit) characters in length. Both ends of the wireless data link must use the same parameter values.

In addition to Wi-Fi Protected Access (WPA) and Wired Equivalent Privacy (WEP), the unit supports Advanced

Encryption Standard (AES) 128-bit encryption. To provide even stronger encryption, the AES CCM Protocol is also

supported.

Click Configure > Security > Encryption to set encryption keys for the data transmitted and received by the 5012-SUR.

Note that all devices in one network must use the same encryption parameters to communicate to each other.