Specifications

Configuration Tsunami MP.11 5012-SUR Installation and Management
Network Parameters
62
Enable and Configure the DHCP Server
Click Configure > Network >DHCP Server to enable the unit on a DHCP Server. The Gateway IP Address and
Primary DNS IP Address must be entered, there must be at least one entry in the DHCP Server IP Pool Table, and the
DHCP Relay Agent must be disabled, in order to enable the DHCP Server.
When enabled, the DHCP server allows allocation of IP addresses to hosts on the Ethernet side of the SU or BSU.
Specifically, the DHCP Server feature lets the SU or BSU respond to DHCP requests from Ethernet hosts with the
following information:
Gateway IP address
Subnet Mask
DNS Primary Server IP address
DNS Secondary Server IP
The following parameters are configurable:
DHCP Server Status: Verify that DHCP Relay Agent is disabled. After you have made at least one entry in the DHCP
server IP Pool Table, enable DHCP Server by selecting “Enable” from the DHCP Server Status pull-down menu.
NOTE: There must be at least one entry in the DHCP server IP Pool Table to enable DHCP server. Also, DHCP
server cannot be enabled if DHCP Relay Agent is enabled.
Subnet Mask: The unit supplies this subnet mask in its DHCP response to a DHCP request from an Ethernet host.
Indicates the IP subnet mask assigned to hosts on the Ethernet side using DHCP.
Gateway IP Address: The 5012-SUR supplies this gateway IP address in the DHCP response. Indicates the IP
address of a router assigned as the default gateway for hosts on the Ethernet side.
Primary DNS IP Address: The 5012-SUR supplies this primary DNS IP address in the DHCP response. Indicates the
IP address of the primary DNS server that hosts on the Ethernet side uses to resolve Internet host names to IP
addresses
Secondary DNS IP Address: The 5012-SUR supplies this secondary DNS IP address in the DHCP response.
Number of IP Pool Table Entries: The number of IP pool table entries is a read-only field that indicates the total
number of entries in the DHCP server IP Pool Table. See Add Entries to the DHCP Server IP Pool Table.