Specifications

Basic Management Tsunami MP.11 5012-SUR Installation and Management
Rebooting and Resetting
44
Reset to Factory Default
If necessary, you can reset the unit to the factory default settings. This must be done only when you are experiencing
problems. Resetting to the default settings requires you to reconfigure the 5012-SUR. To reset to factory default settings:
1. Click Commands > Reset.
2. Click the Reset to Factory Default button. The device configuration parameter values are reset to their factory
default values.
If you do not have access to the unit, you can use the procedure described in Hard Reset to Factory Default as an
alternative.