Specifications

Installation and Initialization Tsunami MP.11 5012-SUR Installation and Management
Installation Procedure
19
Step 3: Mount Unit to Pole
Mount the 5012-SUR to a pole as follows:
1. Using a screwdriver, turn the screw on the band clamp counter-clockwise until the clamp opens.
2. Place the back of the 5012-SUR against the pole such that the pole fits into the curved portion of the unit.
3. With the 5012-SUR aimed in the direction of the BSU, slide the flat end of the band clamp around the pole and
through the top opening in the 5012-SUR unit, threading the flat end of the band clamp into the metal catch at the
other end.
4. Using a 5/16” nutdriver or a screwdriver, turn the screw on the band clamp clockwise until it is tight enough to hold the
unit in place
NOTE: Do not fully tighten band clamps; you must first ensure a functional link to the BSU (Step 4: View LEDs/Adjust
Mounting).
5. Repeat procedure to attach other band clamp through bottom opening in the 5012-SUR unit.
NOTE: Do not fully tighten band clamps; you must first ensure a functional link to the BSU (Step 4: View LEDs/Adjust
Mounting).
The mounted unit, using the optional Proxim universal pole mounting kit (P/N 1087-UMK), is shown below.
Turn counter-clockwise
Turn clockwise