Specifications

Tsunami MP.11 5012-SUR Installation and Management
14
2
Installation and Initialization
See the following sections:
• Hardware Overview
• Product Package
• Installation Procedure
– Step 1: Choose a Location
– Step 3: Mount Unit to Pole
– Step 2: Attach Cables
– Step 4: View LEDs/Adjust Mounting
– Step 5: Close Cable Compartment
– Step 6: Tighten Band Clamps/Secure Ethernet Cable
– Step 7: Install Documentation and Software
• Initialization
• Logging in to the Web Interface
Hardware Overview
The 5012-SUR is an full-featured outdoor Subscriber Unit (SU) that contains an integrated, vertically polarized 18 dBi
antenna and is fully compatible with Tsunami MP.11 Model 5054, 5054-R, and 5054-R-LR Base Station Units (BSUs).
The unit is designed be mounted to a 1” - 1.5” diameter pole (not included). An optional universal pole mounting kit is
also available from Proxim (P/N 1087-UMK); this kit is designed to mount directly to a flat surface such as a roof, wall, or
under an eave.
The 5012-SUR is powered through Power-over-Ethernet via an 802.3af-compliant PoE injector such as the Proxim 1-
Port Power Injector (purchased separately; P/N 4301-xx), and is equipped with the following connectors, indicators, and
controls:
• Ethernet port
• RS-232 serial port
• LEDs: Ethernet, wireless, power
• Reset button: Reboots the hardware and software
• Reload button: Resets the unit to factory defaults
Ethernet port Serial port
Reload button
Power LED
Wireless LED
Ethernet LED
Reset button