Specifications

Introduction Tsunami MP.11 5012-SUR Installation and Management

Power-over-Ethernet

The 5012-SUR is equipped with a Power-over-Ethernet (PoE) module so it can also be powered through a PoE injector

such as the Proxim 1-Port Active Ethernet DC Injector (ordered separately; P/N 4301-US/-AU/-EU/-UK). Using PoE, you

can provide electricity and wired connectivity to the unit over a single Category 5 cable.

The PoE integrated module receives –48 VDC over a standard Cat5 Ethernet cable.

• Maximum power supplied to the 5012-SUR is 11 Watts. The units typically draw less than 9 Watts.

• You must have a PoE injector connected to the network to use PoE. The injector is not a repeater and does not

amplify the Ethernet data signal.

• If connected to a PoE DC Injector and an AC power supply simultaneously, the radio draws power from PoE.

• The cable length between the PoE DC Injector and the radio should not exceed 100 meters (approximately 325 feet).