Specifications

Procedures Tsunami MP.11 5012-SUR Installation and Management
Configuration Restore
110
Configuration Restore
You can restore the configuration of the 5012-SUR by downloading a configuration file. The configuration file contains
the configuration information of an 5012-SUR.
To download a configuration file through the Web Interface:
1. Set up the TFTP server as described in TFTP Server Setup.
2. Access the 5012-SUR as described in Logging in to the Web Interface.
3. Click Commands > Download.
4. Fill in the following details:
• Server IP Address <IP address TFTP server>
• File Name <configuration file name>
• File Type Config
• File Operation Download
• Click OK to start the file transfer.
The 5012-SUR downloads the configuration file. The TFTP server program should show download activity after a few
seconds. When the download is complete and the system rebooted, the configuration is restored.