Specifications

Procedures Tsunami MP.11 5012-SUR Installation and Management
Configuration Backup
109
Configuration Backup
You can back up the 5012-SUR configuration by uploading the configuration file. You can use this file to restore the
configuration or to configure another 5012-SUR (see Configuration Restore).
To upload a configuration file through the Web Interface:
1. Set up the TFTP server as described in TFTP Server Setup.
2. Access the 5012-SUR as described in Logging in to the Web Interface.
3. Click Commands > Upload.
4. Fill in the following details:
• Server IP Address <IP address TFTP server>
• File Name <configuration file name>
• File Type Config
• File Operation Upload
5. Click OK to start the file transfer.
The 5012-SUR uploads the configuration file. The TFTP server program should show upload activity after a few seconds.
When the upload is complete, the configuration is backed up.