Specifications

Procedures Tsunami MP.11 5012-SUR Installation and Management
Web Interface Image File Download
108
Web Interface Image File Download
In some cases, it may be necessary to upgrade the embedded software of the 5012-SUR by downloading an image file.
To download an image file through the Web Interface:
1. Set up the TFTP server as described in TFTP Server Setup.
2. Access the 5012-SUR as described in Setting the IP Address with ScanTool.
3. Click Commands > Download.
4. Fill in the following details:
• Server IP Address <IP address TFTP server>
• File Name <image file name>
• File Type Image
• File Operation Download
5. Click OK to start the file transfer.
The 5012-SUR downloads the image file. The TFTP server program should show download activity after a few seconds.
When the download is complete, the 5012-SUR is ready to start the embedded software upon reboot.