Installation guide

Introduction Tsunami MP.11 Antenna Installation Guide

Finding Additional Information

Installing Radio Hardware

Antennas typically are used in combination with Tsunami MP.11 radio units. The hardware installation of these radios is

described in the User Guide included with each product.

Configuration and Management

Configuration and management of outdoor radios is accomplished with management tools that come with the systems.

Some examples of management tools are:

• Web-based (HTTP) management

• Command Line Interface via Telnet or serial connection

• Wireless network manager

Safety and Regulatory Information

Consult the Safety and Regulatory Compliance Information guide on the installation CD that comes with your product.

Hardware Specifications

Hardware and radio frequency specifications for the radio units are described in your radio’s Installation and

Management manual. Hardware specifications for the outdoor antennas are listed in the Tsunami MP.11 Recommended

Antennas guide. Both of these documents are found on the product CD.

Additional Files on Your Product CD

All installation CDs that come with your Proxim products include a Release Notes file in the Doc subdirectory. This file

contains information about the software version and drivers. You are advised to print and read the Release Notes file

prior to installing your Proxim products, as it may contain information that was not available when this document was

printed.

Other Sources of Information

You can download all Tsunami MP.11 documentation from the Proxim Support website: http://support.proxim.com. Visit

the website regularly for the latest available information, documentation, software updates, and other Proxim news.