Installation guide

Preparing for Installation Tsunami MP.11 Antenna Installation Guide
Outdoor-Mounted Radio Hardware and Cable Overview
15
Power Injector for Outdoor Units
The power injector is designed for indoor mounting and operation. In addition to supplying power to the radio unit there is
a data output connection on the power supply. The ideal location must satisfy the following requirements:
• The location provides a connection to a grounding type AC wall outlet (100-240 VAC), using the standard power cord
supplied with the unit.
• The location must allow for easy disconnection of the power supply from the AC wall outlet.
• The location provides a connection to the network backbone through an Ethernet CAT5 cable that is connected to a
hub, bridge, or directly into a patch panel or to a computer through a null modem cable.
• The ideal location has a temperature of 0–55º C and a maximum relative humidity (non-condensing) of 95%.