Install guide

MP.11 and MP.11a Quick Install Guide

Mounting the Unit

The following are the mounting options for the MP.11/MP.11a:

▪ Desktop Mount

▪ Wall Mount

▪ Ceiling Mount

Desktop Mounting

This procedure consists of attaching the metal base to the MP.11/MP.11a unit. See “Installation Procedure” on

page 4.

Wall Mounting

Follow these steps to mount the unit on a wall:

1. Identify the location at which you intend to mount the unit.

2. If the unit’s power supply is plugged in, unplug it,

3. Use a Phillips screwdriver to remove the metal base from the underside of the MP.11/MP.11a unit (if you

have not already done so).

4. Press down on the cable cover lock to release the cable cover .

5. Remove the cable cover from the unit.

6. Remove the front and back covers from the unit.