Specifications

MP.11 5054-R/2454-R Installation and Management

System Overview

This chapter provides an overview of the system. See the following sections:

• Changing Basic Configuration Information

• SU Registration

• Dynamic Data Rate Selection (DDRS)

• Quality of Service (QoS)

Changing Basic Configuration Information

To view or change basic system information, click the Configure button on the left side of the Web interface window,

then click the System tab. See System Parameters for detailed information about the fields and selections in this

window.

NOTE: System Name by default contains the actual model number. The following screenshot is for information only.

Country and Related Settings

The unit’s Configure System window provides a selectable Country field that automatically provides the allowed

bandwidth and frequencies for the selected country.

Units sold in the United States are pre-configured to scan and display only the outdoor frequencies permitted by the

FCC. No other Country can be configured. Units sold outside of the United States support the selection of a Country

by the professional installer.

NOTE: Non-US installers should not add an antenna system until the Country is selected, the unit is rebooted, and the

proper power level is configured. The output power level of the final channel selected by DFS scan can be found

in the Event Log.

The Dynamic Frequency Selection (DFS) feature is enabled automatically when you choose a country with a regulatory

domain that requires it. The Transmit Power Control (TPC) feature is always available.