Specifications

Configuration MP.11 5054-R/2454-R Installation and Management
VLAN Parameters
109
The following parameters are configurable:
• MAC: Enter the MAC address of the SU to be configured.
• SU VLAN Mode: The SU VLAN mode can be either Transparent, Trunk, or Access (by default, the BSU is in
Transparent mode).
– When the BSU is in Transparent mode, the SU must be in Transparent mode.
– When the BSU is in Trunk mode, the SU must be in either Access mode or Trunk mode.
– When the BSU is changed from Transparent mode to Trunk mode, all the configured SUs are changed to Trunk
mode by default.
• Access VLAN ID: The Access VLAN ID is configurable in any mode, but applies only when the SU is in Access
mode. The Access VLAN ID values range from 1 to 4095; the default value is 1.
• Access VLAN Priority: The Access VLAN Priority is configurable in any mode, but applies only when the SU is in
Access mode. The Access VLAN priority values range from 0 to 7; the default priority is 0. For voice frames, the
priority field is set to the VoIP configured value (5 according to latest IETF draft, or 6 according to IEEE 802.1D)
regardless of the priority value configured.
• Management VLAN ID: The management VLAN ID is configurable in any mode. The management VLAN ID has a
default value of untagged (-1) and may be configured with a value in the range of 1 to 4095.
• Management Priority: The Management VLAN priority values range from 0 to 7 and the default priority is 0 (zero).
• VLAN 1-16: The VLAN IDs are configurable in any mode, but apply only when the SU is in Trunk mode. The VLAN ID
values range from 1 to 4095; the default value is untagged (-1). The maximum number of VLAN IDs that can be
configured in the SU VLAN Table is 16 for each SU. The SU VLAN IDs must be in the BSU VLAN Table that
corresponds to the BSU.
Edit SU Table Entries
To edit SU table entries, click the Edit/Delete Table Entries button; make your changes on the window displayed, then
click OK to save your changes.