Installation guide

Tsunami MP.11 Recommended Antennas

5 dBi Omni-Directional Antenna

General Description

The Tsunami 5 dBi Omni-Directional Antenna is designed for use in rugged environments. The antenna operates

in the frequency range from 1500 to 2400 MHz. It is supplied with a special proprietary FCC plug and a low-loss

cable.

This antenna uses vertical polarization, which is the most common type of polarization for omni-directional

antennas.

Technical Specifications

Mechanical

Size 24 cm (9.5 in)

Mounting Method Through a 19 mm (0.75 in) M-type hole using a mounting plate.

Connector Standard N female

snap-on with 100% captive pin

Cable

Type 50 ohms low-loss cable

Length 2.5 m (8 ft.)

Color White

Electrical

Frequency Range 2.400 to 2.4835 GHz

VSWR Less than 2:1 nominal

Nominal Impedance 50 ohms

Gain 5 dBi

Polarization Linear vertical

Antenna Environment

Operating Temperature -40 degrees C (-40 degrees F) to +60 degrees C (+140 degrees F)

Wind/survival At least 200 km/h (124 mph)

See also “Selecting the Correct Connector Type” in the Antenna Installation Guide.

At least 100 km/h (62 mph) with 1.25 cm (0.5 in) ice.