Installation guide

Tsunami MP.11 Recommended Antennas

Mounting the 7 dBi Antenna to a Mast

7. Use a wrench to tighten the bracket bolt (item g) to fix the antenna into its position.

CAUTION! Avoid over-tightening the hose-clip nut to avoid damage to the clip and your antenna.

Technical Specifications

Mechanical

Size 43.2 cm (17 in)

Mounting method

Clamps to vertical mast with outside diameter between 35 mm (1.4 in) and 65

mm (2.55 in)

Connector

Standard N (female)

Electrical

Frequency Range 2.400 – 2.484 GHz

VSWR Less than 2:1 nominal

Nominal Impedance 50 ohms

Gain 7 dBi

Polarization Linear vertical

Antenna Environment

Operating temperature -40 degrees C (-40 degrees F) to +60 degrees C (+140 degrees F)

Wind/survival At least 200 km/h (124 mph)

See also “Selecting the Correct Connector Type”.

At least 100 km/h (62 mph) with 1.25 cm (0.5 in) ice.