User's Manual

ORiNOCO Client Utility ORiNOCO
®
802.11a/b/g/n USB Adapter User Guide
48
— Or, select Manually Prompt for LEAP User Name and Password option to manually login and start the
LEAP authentication process.
•Select Use Saved User Name and Password option, if you want to use this option:
— Specify the LEAP user name, password, and domain name in their respective fields.
— Confirm the password.
3. Check the Include Windows Logon Domain with User Name setting to pass the Windows login domain and user
name to the RADIUS server. (default)
4. If desired, check No Network Connection Unless User Is Logged In to force the wireless adapter to disassociate
after logging off.
5. Select the LEAP Authentication Time-out Value (between 30 and 500 seconds) to specify how long LEAP should
wait before declaring authentication failed, and sending an error message. The default is 90 seconds.
6. Click OK to enable the profile.
Using WPA/WPA2 Passphrase Security
To use WPA/WPA2 Passphrase security in the ORiNOCO Client Utility, access the Security Tab in the Profile
Management window.
1. On the Security tab, choose the WPA/WPA2 Passphrase option.
Figure 4-36 Select WPA/WPA2 Passphrase Security
2. Click on the Configure button.
3. Fill in the WPA /WPA2 passphrase (8 to 63 ASCII or 64 hexadecimal characters) in the Configure WAP/WPA2
Passphrase window.
Figure 4-37 Configuring WPA/WPA2 Passphrase
4. Click OK.