User's Manual

ORiNOCO Client Utility ORiNOCO
®
802.11a/b/g/n USB Adapter User Guide
33
Profile Management Tab
The Profile Management tab displays a list of available profiles and their details. Highlight a configuration profile to
display its details including network type, security mode, and the SSIDs (network names) associated with that profile. In
addition, this section also displays the buttons: New, Modify, Remove, Activate, Import, Export, Scan and Order
Profiles.
Figure 4-16 Contents displayed under the Profile Management Tab
Create or Modify a Profile
To create a configuration profile, click New on the Profile Management tab. To modify a configuration profile, select the
configuration from the Profile list and click Modify.
This displays the Profile Management dialog box which consists of three tabs: General, Security and Advanced. By
default, the contents under the General tab are displayed.
Current Power Level Displays the transmit power level rate in mW
Available Power Levels Displays the available power levels for 5 GHz and/or 2.4 GHz.
Current Signal Strength Displays the current signal strength in dBm.
Current Noise Level Displays the current noise level in dBm
Up Time Displays how long the client adapter has been receiving power (in
hours:minutes:seconds). If the adapter runs for more than 24 hours, the Up Time is
displayed in days:hours:minutes:seconds.
802.11b Preamble Displays the 802.11b preamble format.
Current Receive Rate Shows the current receive rate in Mbps.
Current Transmit Rate Displays the current transmit rate in Mbps.
Control Channel Displays the current control channel.
Extension Channel Displays the extension channel. Displayed only if the STA is connected in a 40 MHz
channel. Available for 802.11n devices only.
Control Frequency Displays control frequency the station is using. Available for 802.11n devices only.
Extension Frequency Displays extension frequency the station is using. Available for 802.11n devices only
Channel Set Displays the current channel set.
Channel Width Displays the channel width. Available for 802.11n devices only.