Installation Manual

Tsunami Multipoint Version 1.3 Installation Guide
About Crimping
Loose piece contacts are designed to be crimped with crimp tooling (hand tools, die assemblies, or
crimping heads), but can be done with normal hand tools. The applicable crimp tooling for the contacts is
described later in this section. Read the documentation included with the crimp tooling for the proper
crimping procedure.
Figure 40. Crimping Styles and Insertion
Figure 41. Indoor Portion of Power and Ethernet Cable
Appendix D. Constructing Power and Ethernet Cables 67
CPN 63179 Issue Date: 01/24/03