Installation Manual

Tsunami Multipoint Version 1.3 Installation Guide
If the ping tests are unsuccessful, attempt the following:
▪ Check all IP and computer configurations (for example, if you attempt to ping the BSU from the SU
configuration computer and the BSU and SU’s are in separate networks you must have the
configurations computers gateway set to the SU for the ping to work.)
▪ Adjust the network’s IP settings, if necessary, to achieve IP connectivity.
If the above fails refer to “System Diagnostics” to help debug possible link problems.
Note: See “Chapter 4. System Diagnostics and Operating Tips” on page 40 for information about running system
diagnostics to make sure the equipment is operating as expected .
Chapter 3. Deploying the Subscriber Unit (SU) 39
CPN 63179 Issue Date: 01/24/03