Installation Manual

Tsunami Multipoint Version 1.3 Installation Guide
Installing the Base Station Configuration Software Version 1.5 Console
To install the BSU/SU 1.5 Console:
1. From the Windows Explorer Console1.5 directory, double-click on the BSU folder.
2. Double-click on the Install icon. Two windows open simultaneously: InstallAnywhere Web
Installer — Microsoft Internet Explorer (in disabled mode) superimposed by Security Warning
(in enabled mode).
Click the Yes button on the Security Warning window to close this window and view the Base Station
Configuration Software window.
For the remainder of this procedure, only default settings are used. Select the applicable installer for
your network environment when performing these steps.
3. Click Download 7.5M to download the Tsunami Multipoint Base Station configuration software and
Java VM; click Download 1.7M to download the Tsunami Multipoint Base Station configuration
software without Java VM.
Appendix B. Installing the Software and Upgrading Firmware 52
CPN 63179 Issue Date: 01/24/03