Installation Manual

Tsunami Multipoint Version 1.3 Installation Guide
Turning Off Password Protection
To turn off password protection, from the BSU console, enter setpw<level><oldpw><null><null>
where:
<level> = either admin or user, depending upon which level of password protection you want to
remove. For example, if the current admin password is “superuser,” to remove the admin
password, enter setpw admin superuser null null.
<oldpw> = the old password.
If you turn off both display-level and user-level password protection, restart the BSU to refresh its
memory.
Figure 28. Password Definition/Usage Diagram
Logging In
If password protection is turned on, you must “log in” to the system to either display system status
(user-level privileges) or change the system’s configuration (admin-level privileges).
To log in, enter login <password> where <password> is either the user-level or admin-level password.
Chapter 4. System Diagnostics and Operating Tips 47
CPN 63179 Issue Date: 01/24/03