Installation Manual

Tsunami Multipoint Version 1.3 Installation Guide
Proxim recommends that you retain all the packaging materials (including all internal boxes). In the
unlikely event that the equipment must be returned to the factory, use the original packing materials for
return shipment. The packaging materials are also recommended for transporting the equipment from
location to location.
Mounting the Base Station Unit
You can mount the outdoor component of your Tsunami Multipoint Base Station Unit directly to a pole
with an outside diameter of 1- ½ to 4- ½ inches.
Mounting the BSU is essentially a two-step process:
1. Assemble the BSU’s mounting components on the ground (ground work).
2. Mount the BSU to a pole using the mounting components.
Tsunami Base Station Unit System
Title Part Number Quantity
BSU Installation Kit, consisting of the following:
CD-Tsunami Multipoint Base Station CD
Assembly Cable, WAC, Cat 5, 50 M
Contact Kit, Positronic
Contact Kit, AMP
Mounting hardware (see the following table)
58686
100-00844-02
100-00861-00
100-00862-00
1 each
1 each
1 each
1 each
1 set
BSU Mounting Hardware
Mounting Hardware Part Number Quantity
Mounting Bracket Galvanized (U-Shaped) 200-01114-00 2 each
Screw, 3/8-16 x 1” Full Thread, Hex Head, SS316 720-01130-00 4 each
Washer, Split Lock, # 3/8, SS 316 730-01131-00 4 each
Notched Bracket 200-01115-00 1 each
Bracket, Downtilt 200-01116-00 1 each
Screw, 3/8-16 x 1 ¼ Full Thread, Hex Head, Galvanized 720-01120-00 6 each
Washer, Split Lock, #3/8, Galvanized 730-01122-00 10 each
Lockwasher, Int. and Ext., #3/8, Galvanized 730-01123-00 2 each
Nut, Hex, 3/8-16, Galvanized 740-01125-00 10 each
Bracket, Clamp (M-Shaped) 200-01117-00 2 each
Strap, Clamp 200-01118-00 2 each
Screw, 3/8-16 x 1” Full Thread, Hex Head 720-01119-00 4 each
Screw, 2/1-13 x 7 ½ Full Thread, Hex Head, Galvanized 720-01121-00 4 each
Washer, Split Lock, #1/2, Galvanized 730-01124-00 4 each
Nut, Hex, ½-13, Galvanized 740-01126-00 8 each
Screw, Machine, SEM, #10-32 x 3/8, Int Star 720-00580-00 5 each
Bracket, GPS Antenna Mtg 200-01083-00 1 each
GPS Antenna, WAC Transceiver 100-00754-00 1 each
Clamp, Band, 2” – 5” Diameter, SS Quick Rel 720-01127-00 1 each
Chapter 2. Pre-Installation Tasks 17
CPN 63179 Issue Date: 01/24/03