User's Manual Part 2
Table Of Contents
- Chapter 4. System Diagnostics and Operating Tips
- Appendix A. Initial Settings
- Appendix B. Installing the Configuration Software and Upgrading Firmware
- Appendix C. Technical Specifications
- Burst-Rate Limit
- Downlink/Uplink Throughput
- Frequency Plans
- Tx Power
- Antenna
- Receiver Sensitivity
- Maximum Distance Between Base Station and Subscriber Unit
- System
- Standards Compliance and Interfaces
- Configuration and Management
- Power/Environment Safety
- Physical Dimension
- Installation Details
- Optional Accessories
- Appendix D. Constructing Power and Ethernet Cables
- Appendix E. Lightning Protection Recommendations
- Appendix F. Technical Support and Training
Tsunami Multipoint Version 1.3 Installation Guide
Subscriber Unit (Outdoor Unit)
Size (WxHxD) .............................................. 10.5 x 10.5 x 6.8 inches/26.5 x 26.5 x 17.4 cm
Weight ........................................................ 10 lbs/4.5 kg
Subscriber Unit Power Brick (Indoor Unit)
Size (SxHxD) ............................................... 36 x 5.1 x 2.6 inch/92 x 130 x 67 cm
Weight ........................................................ 2.7 lbs/1.2 kg
Installation Details
Base Station Unit (outdoor unit)...................... Pole mounting, 1.5-4.5” diameter
Subscriber Unit (outdoor unit) ........................ Pole mounting, 1.25-1.75” diameter
Optional Accessories
Base Station Unit
Connector kit ............................................... Part # ACC-5300
Subscriber Unit
Wall mounting kit ........................................ Part # ACC-40100
(contact factory for details)
Connector kit ............................................... Part # ACC-5200
Appendix C. Technical Specifications 61
CPN 63179 Issue Date: 01/24/03