User's Manual Part 2
Table Of Contents
- Chapter 4. System Diagnostics and Operating Tips
- Appendix A. Initial Settings
- Appendix B. Installing the Configuration Software and Upgrading Firmware
- Appendix C. Technical Specifications
- Burst-Rate Limit
- Downlink/Uplink Throughput
- Frequency Plans
- Tx Power
- Antenna
- Receiver Sensitivity
- Maximum Distance Between Base Station and Subscriber Unit
- System
- Standards Compliance and Interfaces
- Configuration and Management
- Power/Environment Safety
- Physical Dimension
- Installation Details
- Optional Accessories
- Appendix D. Constructing Power and Ethernet Cables
- Appendix E. Lightning Protection Recommendations
- Appendix F. Technical Support and Training
Tsunami Multipoint Version 1.3 Installation Guide
Power/Environment Safety
Electrical
Base Station Unit .......................................... -36 to –60 Volts DC, 1.25 Amps
Base Station Unit Power Brick......................... 100-240 Volts AC
Base Station Unit Power Block ........................ 48 Volts DC
Subscriber Unit............................................. 18 to 28 Volts DC, 0.8 Amps
Subscriber Unit Power Brick............................ 115 or 100-240 Volts AC
Operational Temperature
Indoor......................................................... 0° to 55° C
Outdoor....................................................... -33° to 65° C
Humidity
Indoor......................................................... 95% non-condensing
Outdoor....................................................... 5% to 100%, condensing
EIVIC .......................................................... FCC Class B
Safety ......................................................... UL-1950
Environmental Compliance ............................. ETS 300 019
Physical Dimension
Base Station (Outdoor Unit)
Size (WxHxD) .............................................. 10.2 x 24 x 6.6 inches/25.9 x 61 x 16.8 cm
Weight ........................................................ 20 lbs/9 kg
Base Station Power Block (Indoor Unit, for up to 6 Base Stations)
Size (WxHxD) .............................................. 17.2 x 3.5 x 8.25 inches/43.7 x 8.9 x 21 cm
Weight ........................................................ 5 lbs/2.3 kg
Base Station Power Brick (Indoor Unit, for 1 Base Station)
Size (WxHxD) .............................................. 37.4 x 70.9 x 24.8 inch/95 x 180 x 63 cm
Weight ........................................................ 1.5 lbs/0.7 kg
Appendix C. Technical Specifications 60
CPN 63179 Issue Date: 01/24/03










