User's Manual Part 1

Tsunami Multipoint Version 1.3 Installation Guide
Chapter 3. Deploying the Subscriber Unit
Mounting the Subscriber Unit (SU)
The outdoor component of the Subscriber Unit (SU) is designed to directly mount to a pole. Using the
supplied U-bolts, you can mount the SU to a 1-1/4 inch to 1-3/4 inch pole (outside diameter). Using
optional mounting brackets, you can mount the SU to a wall or other flat surface.
Figure 16. Subscriber Unit Installation Kit
Tsunami Subscriber Unit System
Title Part Number Quantity
SU Installation Kit, consisting of the following:
Power Supply, LINEAR, 24 WATT, 24V @ 1A
a
Cable Assembly, Cat 5, WRR Outdoor, 25M
Mounting hardware (see the following table)
6H0-00716-00
100-00737-01
1 each
1 each
1 set
a
220V, SWITCHING, 28V @ 1A REGULATED power supply and international power cord available.
SU Mounting Hardware
Mounting Hardware Part Number Quantity
Mounting Clamp Housing, WRR 200-00775-00 1 each
U-Bolt 1 ½” SCH 40 PIPE 5/16-18 720-01132-02 2 each
Nut, KEP, @5/16, with Lock Washer, CRES 740-00451-00 4 each
Washer, Flat, 5/16, CRES 730-00450-00 4 each
Screw, Machine, SEM, @10-32 x .5, Ext Star, CRES 720-00937-00 2 each
Nut, KEP, #10-32, CRES 740-00938-00 2 each
Screw, #10-16x3/8 Type B, Pan Head Phillips, SS18-8 720-01133-00 1 each
O-Ring, 1.00” Idx1.14” OD 720-00769-00 1 each
Chapter 3. Deploying the Subscriber Unit 31
CPN 63179 Issue Date: 01/24/03