User Manual Part 2

Lynx.GX Installation and Management
The current status of the Spectrum Analyzer is indicated on the bottom. When this menu is first turned on the
analyzer is not running. To start the analyzer, click on the Start button.
The Spectrum Analyzer interrupts traffic on the near end because it is analyzing the spectrum. The far-end radio
is still receiving from the near-end transmitter. Click Start to run the Spectrum Analyzer; it completes a scan
within a few minutes and displays the data as it is processed.
A window such as the following is displayed. Note that the unit is in RED alarm.
Appendix B. Web Interface Windows and Field Descriptions 66