User Manual Part 2

Lynx.GX Installation and Management
CONTACT TAB—VIEWING SUPPORT INFORMATION
Click the Contact tab to view Proxim Support information (see “Support” on page 100). If you are connected to
the Internet, you can click on the URL or on the Proxim logo to open Proxim’s Internet site, and you can click on
the e-mail address to open an e-mail window addressed to Proxim Technical Support.
ADMINISTRATION TAB—CHANGING SYSTEM PASSWORDS, DATE, AND TIME
Click the Admin tab to change the system passwords, system date and time, SNMP community strings, and
radio IP address information. Click the Set button once you configure each field, except for the three IP-related
fields. For these, you can change all three, then press the single Set button next to them. Changing the IP
settings causes the system to restart. You must close the browser and logon again with the new IP address.
From this page, you also gain access to the Spectrum Analyzer page.
Change the default password (managers) for subsequent entry into the NMS browser. Click on Set after
changing the password by entering it two times. If you forget the password, you must reset the IP address and
passwords by holding in the FAR END button on the front of the radio while powering it up.
Appendix B. Web Interface Windows and Field Descriptions 64