User Manual Part 2

Lynx.GX Installation and Management
LOG TAB—VIEWING STATUS AND ALARMS
You can view all or selected status and alarms for the radio when you click the Log tab. You can choose to
view alarms of all levels or selected levels and greater. To update the information, click Refresh at the bottom
of the page. Click Reset to clear the log.
Log Window Field Descriptions
Date/Time
The date and time the status/alarm was reported.
Severity
The severity of the alarm.
Description
A description of the status/alarm.
Status
The alarm status (Normal or Alarm).
Only the most recent alarm log messages are displayed on this page. Download the log to view all log entries
up to the last 20,000. You can download the log information to a location on your station’s local directory by
clicking the Download button and following the instructions displayed.
Select Open in New Window for a quick view of the downloaded file. Size the window to align the columns for
better viewing.
The following table lists the possible alarms that are logged on this page. Spectrum Analyzer on/off, System
Reset, RF Unit Reset, and Log Reset do not have a transition status. All others log the transition into alarm
and out of alarm.
Appendix B. Web Interface Windows and Field Descriptions 62