Installation Manual

Tsunami Multipoint Version 1.3 Installation Guide
6. Follow the on-screen instructions to install the software.
7. Click Done when the installation is finished to close the installer.
Aiming the SU
1. Launch the Subscriber Utility.
Figure 21. Settings Page in Subscriber Utility
2. Choose the desired frequency plan and operating frequency. The factory default is the 4 channel
frequency plan and frequency auto (the SU looks through all frequencies). Selecting a specific
frequency forces the SU to search for a BSU on that specific frequency only. When the Auto option is
selected, the SU searches all frequency channels for a given plan until it finds the strongest signal.
3. Turn on the Audible Signal-Strength Indicator (if not already set to On).
Chapter 3. Deploying the Subscriber Unit (SU) 35
CPN 63179 Issue Date: 01/24/03